精品国产精品一区二区夜夜嗨,99在线观看视频,久久成人一区

3mm直插led紅光,3mm直插led綠光,3mm直插led藍光,3mm直插led黃光,3mm直插led黃綠光,3mm直插led橙光,指示燈專用燈珠

產品型號：TM-L03W-E
應用范圍：照明、指示、背光等
產品描述：臺銘直插式LED,體積小,高亮度,能耗低,應用于照明,背光等領域。

產品介紹

注：亮度、角度、色溫、紫光波段均可按客戶要求做貨。

Type 規格/型號	Emitting Color 顏色	Material 原材料	View Angle 發光角度	VF(V) 電壓		IV (MCD) 亮度		WL(nm) 波長		IF(MA）電流
Type 規格/型號	Emitting Color 顏色	Material 原材料	View Angle 發光角度	Typ	Max	Min	Typ	Min	Max	IF(MA）電流
TM-L03R-E （紅光）	Red	AlGaInP	30°	1.8	2.4	2000	4000	620	630	20MA
TM-L03Y-E （黃光）	Yellow	AlGaInP	30°	1.8	2.4	300	600	585	595	20MA
TM-L03O-E （黃綠）	Yellow Green	AlGaInP	30°	1.8	2.4	50	100	565	575	20MA
TM-L03O-E （橙光）	orange	AlGaInP	30°	1.8	2.4	300	600	600	610	20MA
TM-L3CG-E （翠綠）	Green	InGaN/GaN	30°	2.8	3.4	1200	8000	520	530	20MA
TM-L3B-E （藍光）	Blue	InGaN/GaN	30°	2.8	3.4	300	500	460	475	20MA
TM-L3UV365-E （紫光）	Purple	InGaN/GaN	30°	2.8	3.4	6	8	365	370	20MA
TM-L03UV370-E （紫光）	Purple	InGaN/GaN	30°	2.8	3.4	10	13	370	375	20MA
TM-L3UV380-E （紫光）	Purple	InGaN/GaN	30°	2.8	3.4	14	18	380	385	20MA
TM-L03UV400-E （紫光）	Purple	InGaN/GaN	30°	2.8	3.4	60	70	395	400	20MA
TM-L03UV405-E （紫光）	Purple	InGaN/GaN	30°	2.8	3.4	70	80	400	405	20MA
TM-L03UV410-E （紫光）	Purple	InGaN/GaN	30°	2.8	3.4	80	90	405	410	20MA
TM-L3NB55-E （白光）	White	InGaN/GaN	30°	2.8	---	6000	---	5500	6000	20MA
TM-L3ZB65-E （白光）	White	InGaN/GaN	45°	2.8	---	6000	---	6500	7000	20MA
TM-L3LB80-E （白光）	White	InGaN/GaN	30°	2.8	---	6000	---	2500	10000	20MA

Supporter shaping：

Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.